Functions

Mode 2: Auto lock

With the Mode 2 function, one or more users are linked to the lock which then functions as private storage for one person or a group. The default position of the lock is locked. After approximately 4 seconds, the lock always locks automatically so that when you close the storage unit it is locked without you having to present the card again.

For Flexlock EM, up to 45 users can be programmed in, and for Flexlock Mifare up to 200 users.

Mode 3: Any User

In Mode 3, the default position of the lock is open. This function is for temporary use by a user. This means no specific user is linked to the lock.

The lock is open until someone with any compatible RFID card or tag wishes to use it. The same RFID card or tag must always be used to unlock the lock (apart from the service card which is the master key). If someone else tries to open the lock, it emits an error signal.

Once the user has unlocked it and removed their things, the lock is left in the open position and is then ready for a new user to use it. A typical application would be lockers in gyms and swimming baths.

Mode 4: Any User 12 hour timer

Just like Mode 3, Mode 4 is for open temporary storage for any user, but with a time restriction on how long the lock may be used. Just like in Mode 3, any user can lock it with their own RFID card. The difference is that if this user does not return within 12 hours, the lock will automatically unlock after that time.

Mode 5: Any User 2 hour timer

Mode 5, just like Mode 4, is for open temporary storage, but with a time restriction on how long the lock may be used. Just like in Mode 3, any user can lock it with their own RFID card. If this user does not return within 2 hours, the lock will automatically unlock after that time.